Basler-electric BE1-11 IEC 61850 Protocol Uživatelský manuál Strana 12
- Strana / 100
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
6 9424200892 Rev F
IED Configurator Tool (BEST61850™)
BEST61850 performs the following functions:
• Imports an SCD file and extracts the necessary information for each IED in the system
• Maps subscribed GOOSE messages between devices
• Configures published GOOSE messages
• Configures DataSets
• Configures Report Control Blocks (RCB)
• Creates a CID file and uploads it to the IED or exports it to a file
• Performs any additional engineering operations
ICD File (IED Capability Description File)
The capabilities of an IED are described in this file. The file contains logical node type definitions and may
contain an optional substation section.
SSD File (System Specification Description File)
This file describes the single line diagram of the substation and the required logical nodes. It contains a
substation description section and the data templates and logical node definitions.
SCD File (Substation Configuration Description File)
This file contains the data exchanged from the system configuration tool to the IED configuration tool. It
contains all IEDs, a communication configuration section, and a substation description.
CID File (Configured IED Description File)
This file contains the data exchanged from the IED configuration tool to the IED.
SCL Object Model
The SCL (Substation Configuration Language) object model consists of the following parts:
• The primary (power) system structure
• The communications system
• The application level communication
• Each IED
• Instantiable logical node (LN) type definitions
• The relations between instantiated logical nodes and their hosting IEDs on one side and the
switchyard (function) parts on the other side
Figure 4 shows an instance of the SCL object model: a simple example of an SA (Substation
Architecture) system used for a switchyard. The switchyard has a 110 kV voltage level E1. It is a double
bus bar system with two line bays =E1Q1 and =E1Q3, and a bus coupler =E1Q2. The IEDs are already
assigned to switchyard functionality (for example the bay controller –E1Q1SB1 as a product is assigned
to bay =E1Q1, and its Logic Node CSWI1 controls the circuit breaker =E1Q1QA1 via the Logic Node
XCBR1 on the IED –E1Q1QA1B1). Figure 4 uses a – (minus) sign to indicate the product-related
designations. The functional name is not repeated. The station level communication sub network is
named W1. There are three additional sub networks at process level (W2, W3, and W4).
IEC 61850 Engineering BE1-11
- INSTRUCTION MANUAL 1
- Preface 3
- Warning! 4
- Contents 5
- General Information 7
- IEC 61850 Configuration 8
- References 9
- IEC 61850 Engineering 11
- SCL Object Model 12
- P0061-69 15
- Signal Identification 16
- IED Related Naming 16
- LN Prefix 17
- LN Class 17
- LN Instance # 17
- P0061-65 18
- Signal Engineering 20
- BESTCOMSPlus® 23
- 18 9424200892 Rev F 24
- BESTCOMSPlus® BE1-11 24
- BEST61850™ 25
- Menu Bar 26
- BEST61850™ Settings 26
- Datasets 27
- Figure 18. Datasets Tab 28
- Published IED GOOSE 29
- Subscribed IED GOOSE 30
- Report Controls 31
- File Viewer 33
- Configuration Example 34
- Configure DataSets 35
- Figure 27. Datasets Tab 36
- Save a CID File 43
- 9424200892 Rev F 39 45
- BE1-11 BEST61850™ 45
- 40 9424200892 Rev F 46
- BEST61850™ BE1-11 46
- File Transfer 49
- Data Tags 51
- 44 9424200892 Rev F 52
- Data Tags BE1-11 52
- 9424200892 Rev F 45 53
- BE1-11 Data Tags 53
- 46 9424200892 Rev F 54
- 9424200892 Rev F 47 55
- 48 9424200892 Rev F 56
- 9424200892 Rev F 49 57
- 50 9424200892 Rev F 58
- 9424200892 Rev F 51 59
- 52 9424200892 Rev F 60
- 9424200892 Rev F 53 61
- 54 9424200892 Rev F 62
- 9424200892 Rev F 55 63
- 56 9424200892 Rev F 64
- 9424200892 Rev F 57 65
- 58 9424200892 Rev F 66
- 9424200892 Rev F 59 67
- 60 9424200892 Rev F 68
- 9424200892 Rev F 61 69
- 62 9424200892 Rev F 70
- 9424200892 Rev F 63 71
- 64 9424200892 Rev F 72
- 9424200892 Rev F 65 73
- 66 9424200892 Rev F 74
- 9424200892 Rev F 67 75
- 68 9424200892 Rev F 76
- 9424200892 Rev F 69 77
- 70 9424200892 Rev F 78
- 9424200892 Rev F 71 79
- Conformance Statements 81
- 74 9424200892 Rev F 82
- Mandatory Intop Tissues 94
- Optional IntOp Tissues 95
- Revision History 97
Související produkty a manuály pro Relé Basler-electric BE1-11 IEC 61850 Protocol
Relé Basler-electric BE1-11g Uživatelský manuál
(754 stránky)
(754 stránky)
Relé Basler-electric BE1-50 Uživatelský manuál
(44 stránky)
(44 stránky)
Relé Basler-electric BE1-50/51B Uživatelský manuál
(76 stránky)
(76 stránky)
Relé Basler-electric BE1-50/51M Uživatelský manuál
(74 stránky)
(74 stránky)
Relé Basler-electric BE1-851 Uživatelský manuál
(364 stránky)
(364 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.104 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce